Feature #390

Simulator to generate random sensor hub data

Added by Hans Cappelle about 6 years ago. Updated almost 6 years ago.

Status:NewStart date:04/16/2012
Priority:LowDue date:
Assignee:-% Done:

0%

Category:SimulatorSpent time:-
Target version:3.5 Maintenance

Description

Like it is generating fake tx/rx signal strength values it could also create fake sensor data values useful for testing.

Associated revisions

Revision 376
Added by Hans Cappelle almost 6 years ago

closes #418 and refs #390 adding sensor hub data generation to simulator. Currently only volt sensor values are supported and should be randomized

Revision 379
Added by Hans Cappelle almost 6 years ago

refs #390 adding sensor hub data generation to simulator

Revision 380
Added by Hans Cappelle almost 6 years ago

refs #390 adding sensor hub data generation to simulator > Even with simulation with fixed values values for voltage jump per cell!! Need to check this

Revision 406
Added by Hans Cappelle almost 6 years ago

refs #390 implementing dummy sensor data for rpm sensor

History

#1 Updated by Hans Cappelle about 6 years ago

  • Category set to Simulator

set category to simulator

#2 Updated by Hans Cappelle about 6 years ago

  • Priority changed from Normal to Low

could be useful for testing without any valid data. But if you have a hub and sensors you could as well test with a valid log file.

#3 Updated by Espen Solbu almost 6 years ago

  • Target version changed from 3.0 FrSky hub and sensors to 3.5 Maintenance

Also available in: Atom PDF